Template:Tenderloin Install Steps

Preparing your device & installation instructions

1. Create an ext3fs lvm partition of at least 1GB (use Tailor or Meta-Doctor to achieve this). It must be named ext3fs ! Tailor automatically uses this name for an ext3 partition.

2. Download the image, copy it to the USB driver (/media/internal) and extract it into the new partition by issuing the following commands:

mkdir /media/ext3fs && mount /dev/store/ext3fs /media/ext3fs

cd /media/internal

tar xzf webos-ports-dev-image-tenderloin.tar.gz -C /media/ext3fs

3. Download the kernel and add it to the boot partition as uImage.LuneOS and either symlink it to uImage or use moboot. Follow the instruction below:

- Boot into webOS

- Run novaterm

- mount -o remount,rw /boot

cd /boot

rm uImage

exit

novaterm put file://boot/uImage < moboot.uImage

novaterm

cd /boot

ln -sf uImage-2.6.35-palm-tenderloin uImage.webOS

Output should look like: