Difference between revisions of "Template:Device Pinephone"

From WebOS-Ports
Jump to navigation Jump to search
m
m
Line 1: Line 1:
<!--
 
NOTICE: THIS IS A GENERIC "BLANK" TEMPLATE TO BE EDITED FOR YOUR DEVICE AND COPIED TO:
 
 
Template:Device_Pinephone
 
 
Where CODENAME is the correct codename for your device. Using this template, you can automatically generate as device information pages, installation instructions, build walkthroughs, etc. and ensure that the instructions for each device are complete and uniformly presented.
 
 
This template is annotated. Do be sure to fill out all required sections, but feel free to leave fields blank as when optional. You may also uses spaces, commas, and multiple lines and even links and other wiki formatting!
 
Note: If you need to add a section, make sure to inform others about it, e.g. here: http://wiki.cyanogenmod.org/w/Wiki_Problems
 
 
Also we recommend that you delete this notice and the tip below when you make your own device_CODENAME page so that you do not confuse any new maintainers of that page in the future. Good luck! :)
 
-->
 
 
<noinclude>
 
<noinclude>
 
{{tip|tip= This page is to be used as a '''reference''' and is used to create your own device_Pinephone page.  If you are adding a device, copy/paste the contents of this page into a new, blank template and fill in all the relevant fields.  DO NOT modify this page itself.  Additional information/documentation is included in the source of this page.
 
{{tip|tip= This page is to be used as a '''reference''' and is used to create your own device_Pinephone page.  If you are adding a device, copy/paste the contents of this page into a new, blank template and fill in all the relevant fields.  DO NOT modify this page itself.  Additional information/documentation is included in the source of this page.
Line 16: Line 4:
 
</noinclude>
 
</noinclude>
  
{{{{{function}}}<!-- don't touch this line -->
+
{{{{{function}}}
|link_kind={{{link_kind}}}<!-- don't touch this either. Used for generating links -->
+
|link_kind={{{link_kind}}}
 
|device_clockworkmod_version=N/A
 
|device_clockworkmod_version=N/A
 
|device_clockworkmod_link=N/A
 
|device_clockworkmod_link=N/A

Revision as of 10:53, 17 November 2020

Helpful Tip

This page is to be used as a reference and is used to create your own device_Pinephone page. If you are adding a device, copy/paste the contents of this page into a new, blank template and fill in all the relevant fields. DO NOT modify this page itself. Additional information/documentation is included in the source of this page.


{{{{{function}}} |link_kind={{{link_kind}}} |device_clockworkmod_version=N/A |device_clockworkmod_link=N/A |device_name=Pinephone |device_codename=pinephone |device_vendor=pine64 |device_vendor_longname=Pine64 |device_recovery_install_method=dd |device_manufacturer=Pine64 |device_wop_versions_supported= |device_last_wop_branch_supported= |device_aka= |device_notes=WIP |device_release_date=2020 July 16 |device_carrier= |device_recovery_boot_steps=Volume Up & Power |device_recovery_twrp= |device_bootloader_boot_steps= |device_fastboot_boot_steps= |device_image=pinephone.jpg |device_soc=Allwinner A64 |device_cpu=Cortex-A53 |device_cpu_frequency=1.2 GHz |device_cpu_cores=quad |device_ram=2 or 3GB |device_gpu=Mali-400 MP2 |device_type=phone |device_weight=185 g (6.52 oz) |device_dimensions=160.5 mm (6.32 in (h)
76.6 mm (3.02 in) (w)
9.2 mm (0.36 in) (d) |device_screen_dimension=151 mm (5.95 in) |device_screen_resolution=1440×720 |device_screen_density=274 |device_screen_technology=IPS LCD |device_internal_storage=16 or 32GB |device_sdcard=up to 32GB |device_bluetooth=4.0 |device_wifi=802.11 b/g/n |device_gsm_frequency=GSM, GPRS, EDGE 850, 900, 1800, 1900 MHz |device_cdma_frequency=UMTS, WCDMA, HSDPA 800, 850, 900, 1700(AWS), 1900, 2100 MHz |device_wimax_frequency= |device_lte_frequency=LTE B1,B2,B3,B4,B5,B7,B8,B12,B13,B18,B19,B20,B25,B26,B28,B38,B39,B40,B41 |device_camera=5MP |device_camera_flash=LED |device_secondary_camera=2MP |device_peripherals=accelerometer,gyroscope,Ambient Light Sensor,Proximity sensor,compass,barometer |device_is_nexus_device= |device_oem_unlock_command= |device_local_manifest= |device_kernel_override=pine64-kernel |device_sound= |device_cm_forum= |device_irc_channel=#pinedev |device_power=3000 mAh |device_maintainers= |device_contributors= |device_additional_info= |install_samsung_recoverytype= |install_exploit= |install_md5sum= |install_devname= |install_file= |device_download_mode_steps= |device_hboot= |device_htcunlock= |device_htcunlocklegacy= |device_sonyunlock= |device_motounlock= }}